top of page

My Site 1 Group

Public·12 members
Aitor Bermejo San Jose
Aitor Bermejo San Jose

Gadget Serial Control Driver Samsung S2


Gadget Serial Control Driver Samsung S2




The gadget serial control driver is a software component that allows the communication between a Samsung Galaxy S2 device and a computer via a USB cable. The driver enables the device to act as a serial port, which can be used for debugging, flashing, or accessing the device's shell. The driver is also required for installing custom recovery images, such as TeamWin Recovery Project (TWRP), on the device.


How to install the gadget serial control driver on Windows




To install the gadget serial control driver on Windows, you need to follow these steps:


DOWNLOAD: https://jinyurl.com/2w3zo6


  • Download the Samsung USB Driver for Mobile Phones from [Samsung's official website] and install it on your computer.



  • Connect your Samsung Galaxy S2 device to your computer via a USB cable.



  • On your device, go to Settings > Applications > Development and enable USB debugging.



  • On your computer, open Device Manager and look for an unknown device named Gadget Serial under Other devices.



  • Right-click on the device and select Update Driver Software.



  • Select Browse my computer for driver software and then Let me pick from a list of device drivers on my computer.



  • Select Samsung Mobile USB Serial Port from the list and click Next.



  • Wait for the driver installation to complete and then click Close.



You have successfully installed the gadget serial control driver on your Windows computer. You can now use tools like Heimdall or Odin3 to flash custom recovery images or firmware on your device.


How to install the gadget serial control driver on Linux




To install the gadget serial control driver on Linux, you need to follow these steps:


  • Connect your Samsung Galaxy S2 device to your computer via a USB cable.



  • On your device, go to Settings > Applications > Development and enable USB debugging.



  • On your computer, open a terminal and type the following command: sudo modprobe usbserial vendor=0x04e8 product=0x6860



  • Type the following command to check if the driver is loaded: dmesg grep tty



  • You should see a message like this: [ 123.456789] usb 1-1: generic converter now attached to ttyUSB0



  • The ttyUSB0 is the name of the serial port that corresponds to your device. You can use tools like Heimdall or adb to communicate with your device via this port.



You have successfully installed the gadget serial control driver on your Linux computer. You can now use tools like Heimdall or adb to flash custom recovery images or firmware on your device.


Sources





  • [Samsung USB Driver for Mobile Phones]



  • [Gadget Serial Control Driver Samsung S2 i-iron]



  • [Gadget Serial Control Driver Samsung S2 - Collection OpenSea]






About

Welcome to the group! You can connect with other members, ge...

Members

  • the Meadow Ranch
  • I
    ifTennischannel.com/activate
  • R
    roeth
  • Aitor Bermejo San Jose
    Aitor Bermejo San Jose
  • P
    pricemint
bottom of page